options:
  - !Option
    name: unstable-hal
    display_name: Enable unstable HAL features.
    help: "This configuration enables unstable esp-hal features.
      These come with no stability guarantees, and could be changed or removed at any time."

  - !Option
    name: alloc
    display_name: Enable allocations via the esp-alloc crate.
    help: esp-alloc comes with no stability guarantees at this time.

  - !Option
    name: wifi
    display_name: Enable Wi-Fi via the esp-wifi crate.
    help: esp-wifi comes with no stability guarantees at this time.
    requires:
      - alloc
      - unstable-hal
    chips:
      - esp32
      - esp32c2
      - esp32c3
      - esp32c6
      - esp32s2
      - esp32s3

  - !Option
    name: ble
    display_name: Enable BLE via the esp-wifi crate.
    help: esp-wifi comes with no stability guarantees at this time.
    requires:
      - alloc
      - unstable-hal
    chips:
      - esp32
      - esp32c2
      - esp32c3
      - esp32c6
      - esp32h2
      - esp32s3

  - !Option
    name: embassy
    display_name: Add embassy framework support.
    help: esp-hal-embassy comes with no stability guarantees at this time.
    requires:
      - unstable-hal

  - !Option
    name: probe-rs
    display_name: Use probe-rs to flash and monitor instead of espflash.
    help: probe-rs is a debugger that connects to the chips over JTAG. It can be used to flash and
      monitor, and it can also be used to interactively debug an application, or run tests on the
      hardware. Semihosting or RTT-based technologies like defmt-rtt require probe-rs.
    chips:
      - esp32c6
      - esp32h2
      - esp32s3

  - !Option
    name: probe-rs
    display_name: Use probe-rs to flash and monitor instead of espflash.
    help: probe-rs is a debugger that connects to the chips over JTAG. It can be used to flash and
      monitor, and it can also be used to interactively debug an application, or run tests on the
      hardware. Semihosting or RTT-based technologies like defmt-rtt require probe-rs.

      probe-rs requires a debug probe like esp-prog, and will not work with USB-UART adapters that
      often come on development boards.
    chips:
      - esp32
      - esp32s2
      - esp32c2
      - esp32c3

  - !Category
    name: flashing-probe-rs
    display_name: Flashing, logging and debugging (probe-rs)
    requires:
      - probe-rs
    options:
      - !Option
        name: defmt
        display_name: Use defmt to print messages.
        selection_group: log-frontend
      - !Option
        name: panic-rtt-target
        display_name: Use panic-rtt-target as the panic handler.
        selection_group: panic-handler
        requires:
          - probe-rs

  - !Category
    name: flashing-espflash
    display_name: Flashing, logging and debugging (espflash)
    requires:
      - "!probe-rs"
    options:
      - !Option
        name: log
        display_name: Use the log crate to print messages.
        selection_group: log-frontend
        requires:
          - "!probe-rs"
      - !Option
        name: defmt
        display_name: Use defmt to print messages.
        selection_group: log-frontend
      - !Option
        name: esp-backtrace
        display_name: Use esp-backtrace as the panic handler.
        selection_group: panic-handler
        requires:
          - "!probe-rs"

  - !Category
    name: optional
    display_name: Options
    options:
      - !Option
        name: wokwi
        display_name: Add support for Wokwi simulation using VS Code Wokwi extension.
        chips:
          - esp32
          - esp32c3
          - esp32c6
          - esp32h2
          - esp32s2
          - esp32s3

      - !Option
        name: dev-container
        display_name: Add support for VS Code Dev Containers and GitHub Codespaces.

      - !Option
        name: ci
        display_name: Add GitHub Actions support with some basic checks.

  - !Category
    name: editor
    display_name: Optional editor config files for rust-analyzer
    options:
      - !Option
        name: helix
        display_name: Add rust-analyzer settings for Helix Editor

      - !Option
        name: vscode
        display_name: Add rust-analyzer settings for Visual Studio Code